BBS水木清华站∶精华区

chuwen@资策会主机.seed.net.tw (chuwen)

本版只适用於 big5-pack-0.4c.tgz 其它版本我还没试过
架设环境为 Slackware 2.0.0 Linux kernel 1.1.18

---------------- xcin ---------------------------------------------

1.首先请确认您是否有 mount dos partition 於 /dosc 如没有请照下例：
        mkdir /dosc
        mount -t msdos /dev/hda(n) /dosc
        注：(n)为 partition 编号
2.以 root login 後执行 startx
3.进入Ｘ後按下滑鼠左键从 Shells 内选取 Rxvt 或 Large Rxvt 即可看到
  Ｘ内之 Shell
4.解开您的 big5-pack-0.4c.tgz
        cd /usr/local/src
        tar zxvf [您的路径]/big5-pack-0.4c.tgz
        cd big5-pack
5.编译 xcin 前先修改 Imakefile
        cd xcin
        vi Imakefile
        修改 ETDIR=/dosd/etc 为 ETDIR=/dosc/et3
        修改 BUS4=1 为 BUS4=0
        xmkmf
        因本版之 Makefile 有问题请再做二个动作
        rm ascfont.15 ascfont.24
        ln -sf /dosc/et3/xusrar30.tbl xusrar30.tbl
6.开始编译
        make
        make install
7.完成

---------------- crxvt -------------------------------

1.更换路径并编译
        cd /usr/local/src/big5-pack/crxvt
        xmkmf
        make
        make install

---------------- big5font ------------------------------

1.更换路径
        cd /usr/local/src/big5-pack/big5font

2.编译前先修改 Makefile
        vi Makefile
        修改 ETDIR=/dosd/etc 为 ETDIR=/dosc/et3
        因本版之 Makefile 有问题请再做一个动作
        mkdir /usr/X386/lib/X11/fonts/chinese

3.编译
        make
        make install

4.完成

---------------- configure ---------------------------------------
1.更改 Termcap
        mv /etc/termcap /etc/termcap.linux
        cp /usr/local/src/big5-pack/rc/termcap /etc/termcap

2.设定 joe 环境
        mv $HOME/.joerc $HOME/.joerc.bak
        cp /usr/local/src/big5-pack/rc/joerc $HOME/.joerc

3.增加 $HOME/.inputrc 才能输入中文
        vi $HOME/.inputrc
        内容 ----------------
        set convert-meta off
        set output-meta on
        ---------------------
4.设定Ｘ内定值
        增加以下几列至 $HOME/.Xdefaults
--------------------------------------------------------
        Scrollbar.JumpCursor:  True
        xterm*cursorColor: red
        xterm*Background:  yellow
        xterm*saveLines:  600
        xterm*ScrollBar:  true
        xterm*Font:  10x20
        Seyon.metaKeyTranslation:  false
        rxvt.background:  gold
        rxvt.font:  10x20
        rxvt.scrollbar:  fat
        rxvt.saveLinesfP:  600
        crxvt.background:  black
        crxvt.foreground:  white
        crxvt.font:  vga12x24
        crxvt.fnb5:  et24m
        crxvt.scrollbar:  fat
        crxvt.saveLinesfP:  600
        xcin.fnb5:  et24m
        xcin.fn:  vga12x24
        xcin.geometry:  +100-0
        xcin.phokbm:  1
        #xcin.inmd:  8
        #xcin.vocbox:  /usr/users/dhliu/xi/voca.box
        xcin.in1:  cj.tab
        #xcin.in8:  ar30.tab
------------------------------------------------------------
        以上为显示 24x24 字型之设定
        如欲使用 16x15 字型者请改 vga12x24 -> vga8x16
                                  et24m -> et16
5.增加 xcin,crxvt 至 fvwm 选单内之 Chinese 选项
        cd /var/X11/lib/X11/fvwm
        vi system.fvwmrc
        增加有(+)号之列, 但不要把(+)号也打进去了.
------------------------------------------------------------
        Popup "Applications"
                Title "Applications"
                Exec "Ghostview" exec ghostview &
                Exec "GNU Emacs" exec emacs &
                Exec "Lucid Emacs" exec lemacs &
                Exec "Seyon" exec seyon -modem /dev/modem &
                Exec "XV" exec xv &
                Exec "X3270" exec x3270 &
                Exec "Xedit" exec xedit &
                Exec "Xfig" exec xfig &
                Exec "Xfilemanager" exec xfilemanager &
                Exec "Xfm" exec xfm &
                Exec "Xfractint" exec rxvt -font 7x14 -e xfractint &
                Exec "Xgrab" exec xgrab &
                Exec "Xpaint" exec xpaint &
                Exec "Xspread" exec xspread &
                Exec "Xxgdb" exec xxgdb &
        EndPopup

        (+)Popup "Chinese"
        (+)     Title "Big5-package"
        (+)     exec "Xcin" exec xcin &
        (+)     exec "Crxvt" exec crxvt -ls &
        (+)EndPopup

        # This menu will fire up some very common utilities
        Popup "Utilities"
                Title "Utilities"
                Exec "Top" exec rxvt -font 7x14 -T Top -n Top -e t op &
                Exec "Calculator" exec xcalc &
                Exec "Xman" exec xman &
                Exec "Xmag" exec xmag &
                Exec "Oclock" exec oclock &
                Nop ""
                Popup "Applications" Applications
                Nop ""
                Exec "Oclock" exec oclock &
                Nop ""
                Popup "Applications" Applications
                Nop ""
                Popup "Shells" Shells
                Nop ""
        (+)     Popup "Games" Games
                Nop ""
                Popup "Chinese" Chinese
                Nop ""
                Popup "Screensaver" Screensaver
                Nop ""
                Popup "Lock Screen" Screenlock
                Nop ""
                Popup "Exit Fvwm" Quit-Verify
                Nop ""
                Refresh "Refresh Screen"
        EndPopup

6.大功告成祝使用顺利.